Shipping throughout Russia and to other countries

Electric-centric installations E'LKAM UECN et al .

Electro-centrifugal pumps of the ECP for oil production are a multi-stage and multi-section design.
  • ECN pumps. Technical description.
    • The hydraulic protection is used to protect against the ingress of reservoir fluid into the cavity of the electric motor, to compensate for the thermal expansion of the oil volume and to transfer torque to the shaft of the centrifugal pump.
  • Hydro protection. Technical description.
    • The PAD is an ECP drive that converts electrical energy, which is supplied via a cable from above to the suspension area of the installation, into mechanical energy of pump rotation.
  • PAD. Technical description.
    • The input module is connected to the hydraulic protection shaft from below with the help of spline couplings, and at the top with the shaft of the lower section of the ESP, thus, during the operation of the ESP, the rotation of the rotor–shaft of the engine and hydraulic protection is transmitted through this node to the pumping sections.
  • The input module. Technical description.
    • The KPBP submersible cable is a flat armored three-core cable, the length of which directly depends on the depth of descent of the submerged part of the ESP.
  • KPBP. Technical description.
    • Control stations are able to provide full protection of the entire installation, preventing emergencies, while ensuring complete autonomy of actions, even in the simplest configuration.
  • Control stations. Technical description.

    • Catalog

    All E'LKAM products

    The group "New Technologies" offers for review the products of the plant E'LKAM: downhole rod pumps, hollow pump rods, check valves and flushing valves, equipment for simultaneous and separate oil production from two reservoirs, equipment for flushing and warming up wells, hydraulic devices, metal structures of various complexity, low-voltage and geophysical equipment
    • Downhole pump installations E'LKAM
      Downhole pump installations
      USSHN et al .
    • Screw Pump installations E'LKAM
      Screw Pump installations
      USVN et al .
    • Electric-centric installations E'LKAM
      Electric-centric installations
      UECN et al .
    • Telemetry systems E'LKAM
      Telemetry systems
      KSAT-MMP, KSAT-MMN, etc.
    • Special pumps E'LKAM
      Special pumps
      NNVD, NDSH, KSH, etc.
    • Borehole installations E'LKAM
      Borehole installations
      SDU , etc .
    • Ready-made solutions E'LKAM
      Ready-made solutions
      ORD, ORDiZ, OPPS, etc.

    About E'LKAM

    ELKAM-NEFTEMASH (Perm) provides comprehensive solutions, technologies and equipment for the most efficient method of mechanized oil production with minimal costs per ton of extracted liquid.

    • activity

      The key activity of the company is the complex equipment of oil production facilities taking into account the individual needs of the customer based on a comprehensive analysis of local conditions.

    • production

      ELKAM's production facilities include 6 production sites in Russia and the CIS countries. The range of manufactured products is very wide.

    • technologies

      All work is carried out by specially trained and qualified specialists of the ELKAM company using the necessary and modern tools.

    Information Board E'LKAM

    Learn more about our products E'LKAM.
    • ELKAM equipment catalog в магазине ЭЛКАМ
      ELKAM equipment catalog

    NEW TECHNOLOGIES GROUP

    For sales and support please contact
    Send your question now: